I'll try to start this answer off with some of the most important information- the batteries. The batteries you will need to power all of this would need to be 12v deep-cycle batteries with enough amp hour rating to power all of the tools and lights for an extended period of time; since we don't sell batteries, I don't have a specific recommendation but something with a 100 amp hour rating (you'll likely need multiple batteries wired in series to supply enough power to make this work).... view full answer...
To replace your Dometic Duo-Therm air conditioner on your 2006 Dynamax Isata Touring Sedan Motorhome, we have the:
-Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor # ACDOM150 for white,
Or,
-The Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor # ACDOM150B for black.
Both of these options will work great for you and also share the same Btu rating of 15,000, that your Dometic Duo-Therm has.
Additionally, this replacement... view full answer...
You can easily identify if you have the crew cab or a quad cab by looking at the size of your rear doors. If they are the same size as your front doors, then you have a crew cab, if they are 3/4 the size then you have a quad cab.
I have also included an image showing this difference as well.
With that being said, if you have a crew cab, and the Westin E-Series Round Nerf Bars # 23-3560, you can use the:
-Replacement Installation Hardware Kit for Westin E-Series 3" Round Nerf Bars # 23-356PK.... view full answer...
I believe you're asking if you can upgrade from your Lippert Ground Control 2.0 to the Ground Control 3.0, and yes you an technically, however since none of the parts carry over you'd need full system replacement.
If you're interested in this route, the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote # LC358590.
This is a great upgrade option for your 2.0 system, and includes the control module, sensor, wiring harnesses, and mounting hardware, and... view full answer...
I took a look at the MORryde Inflatable Rear Patio Tent for Toy Haulers # MR54KR that you mention, and unfortunately it appears that this has been discontinued, however I do have another potential option.
You may consider taking a look at the ArcHaus Camping Tent and Clip-On Interior Screen Room # SAR024-031.
This tent is a bit smaller than the MORryde patio tent, however the outcome is relatively similar. Although this tent is designed to be used with an SUV, however this may work out... view full answer...
In order to combat against wind on your 2020 Thor Axis 24.1 for better steering and stabilization, you'll want to invest into a rear anti-sway bar.
Take a look at the:
- Roadmaster Rear Anti-Sway Bar # RM-1139-147,
This anti-sway bar is actually confirmed to fit your motorhome, will do a great job of minimizing side-to-side movement to improve overall stability of your vehicle, and will diminish the effects of crosswinds, passing motorists, and shifting cargo.
Included is a product... view full answer...
For your 2022 Ford F-250, to be able to use the Demco Recon 5th Wheel Trailer Hitch # DM8550043 with your factory pucks, you're actually going to want to use the:
-Demco Recon 5th Wheel Trailer Hitch # DM8550045-5W instead.
This is the exact same hitch as # DM8550043, but is designed to be used with your factory pucks.
The Demco Recon # DM8550045-5W has a maximum towing capacity of 21,000lbs, a vertical load limit of 4,000lbs, and has 3 height settings that can be adjusted to fit any... view full answer...
There are a number of parts that are needed in order to flat tow your 2019 Jeep Cherokee Trailhawk, and the best tow bar available in the Nighthawk is a great start. To make it simple for you to order, I'll list all the parts you need to tow your '19 Cherokee Trailhawk with the Roadmaster Nighthawk All Terrain Tow Bar # RM-676.
- Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # RM-521451-5 (note: will not fit models with Active Air Shutters)
- Wiring Kit: Roadmaster Diode 7-Wire... view full answer...
I recommend using the 60" Long x 49" Wide Rhino-Rack Pioneer Platform Rack # RR35TB along with two pairs of the Track Mount # RLTP Legs which are designed to fit the Thule track system on the Leer camper for your 2019 GMC Sierra 2500.
This then gives you the ability to use the Sunseeker Awning # RR32133 and then use the following extensions:
43 Sq Ft - # RR32112
48 Sq Ft - # RR31101 view full answer...
The closest spring we have to that is part # e46SR which is a 6,000 pound 1-leaf spring but it measures 25-1/4 inches long.
If your 26 inch spring is old and flattened out then there's a good chance part # e46SR is what you need because your old one will be longer than a new one. view full answer...
So the short answer is no, there is nothing you can do to your current mounting plate to make another braking assembly fit your current setup. What you have is pretty unique, and when the team and myself took a look at it we were all in agreement that the best step forward is to cut of your current flange and weld on a new one.
Now this is a pretty intensive project and is going to require a special jig that is designed specifically for this, so this isn't something you're going to be... view full answer...
The VIN unfortunately is pretty useless to us, though I do wish we could get some use of it. So with that said, we aren't going to be able to tell you if your car has the factory tow package or not.
There is a pretty easy way you can check yourself though. What you'd normally do is just peek underneath your car and see if you can spot a trailer hitch. If you see a hitch there it's a good chance you've got the tow package, but since you just said you installed a hitch there's a good chance... view full answer...
For a replacement shock you're going to want the Replacement Shock Absorber Spring Kit for Dexter Brake Actuators # TK71-758-00, and for the replacement master cylinder you'll just need the Replacement Master Cylinder Assembly for Dexter Brake Actuators # DX44FR and you'll be all set. view full answer...
If I'm reading this correctly, you'd like to mount the spare tire carrier into your bumper? If that's what you're looking for, there is not going to be anything available. Every spare tire carrier we carry either gets mounted into a stake pocket, bolts around the bumper/trailer frame, or replaces an existing tire carrier like what you'd see on the back of Jeeps.
With that being said, if you were to take let's say the Brophy Rigid Mount Spare Tire Carrier for 4" or 4-1/2" RV or Mini-Motorhome... view full answer...
I may have a solution for you, but the largest breakaway system battery we offer comes with a 10 amp hour battery # BRW87FR; the complete system is the Bright Way Push-to-Test Trailer Breakaway Kit with 2-Amp Charger and 10 Ah Battery - Top Load # 3802311.
I'm not aware of a breakaway system that uses a battery that large and this would be the best solution we have available for this. view full answer...
The keys you need as a replacement for your lost key is the Replacement Key for Thule Racks and Carriers - N020 # THKEYN020. Since SportRack is owned by Thule, Thule manufactures the keys for SportRack carriers. view full answer...
I recommend using the etrailer # e98844 which will give you the 2" receiver you're looking for, so it's ideal for carrying a bike rack or other hitch mounted accessories. This hitch is confirmed as a fit for your 2018 Toyota Highlander.
I've gone ahead and linked an installation video of this hitch and our entire selection of bike racks that will fit in 2" receivers in case you don't already have one. view full answer...
We've seen this with some previous customers, so you're definitely not alone in having to wrestle with your power cord!
I recommend talking a look at the 30 foot Epicord RV Power Cord with Handle - 50 Amp Male to Twist Lock Female Connector # 277-000153. The Epicord will be much more flexible because it uses finer wiring and a bit softer rubber coating so I think it's exactly what you're looking for.
Just to put your mind at ease regarding this I just took a look at some reviews and... view full answer...
The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98903 has been confirmed to fit the 2021 Chrysler Pacifica Hybrid and will provide you with a durable hitch with a 2" receiver that is ideal for either towing or carrying hitch mounted accessories.
If you're also in need of a bike rack, I've linked our entire selection of bike racks for 2" receivers for you to check out, as well as an installation video of this hitch. As of February 2021, there is... view full answer...
You are correct that disc brakes require an actuator with higher psi pressure than what is required by drum brakes. Drum brakes need pressure of 1000-psi but discs need 1500 to 1600-psi. You can convert your Titan Surge-O-Matic Model 6 actuator to disc brake operation by replacing the master cylinder with part # T1777405. This kit includes the master cylinder, mounting plate, hex bolt, push rod assembly and installation hardware.
If your brakes locked up this should not be due to the lower-pressure... view full answer...
Go To Results